Home›Free tools›Solar panel comparison chart

Free toolSolar panel comparison chart

21 solar panels from EcoFlow, BLUETTI, Anker SOLIX and Jackery, side by side. Pick your power station and see which ones are safe to plug in, how many to connect, how fast they fill the battery and what the setup costs.

  • 21panels, 42 to 500 W
  • 72power stations to match
  • 3checks: voltage, watts, connector

Your power station

Choose your power station to see which panels are safe on its solar input, how many to connect and how long a full charge takes.

21 of 21 panels
Specifications of 21 solar panels and their fit on your power station
Solar panelPowerVoltageWeightConnectorOn your stationPrice
Jackery SolarSaga 40 Air solar panelJackerySolarSaga 40 AirPortableAlso charges phones directly over USB.42 W26 Vopen circuit, 2.1 A short-circuit1.98 lb21 W per lbDC8020Pick your station above$129Check price
EcoFlow 45W Portable solar panelEcoFlow45W PortablePortable45 W25.6 Vopen circuit, 2.06 A short-circuit3.09 lb15 W per lbMC4XT60 cable in the boxPick your station above$99Check price
BLUETTI SORA 60 solar panelBLUETTISORA 60Portable60 W27.5 Vopen circuit, 2.76 A short-circuit3.09 lb19 W per lbDC5521Pick your station above$129Check price
Jackery SolarSaga 100 Air solar panelJackerySolarSaga 100 AirPortable100 W29.7 Vopen circuit, 4.1 A short-circuit7.05 lb14 W per lbDC8020Pick your station above$299Check price
Jackery SolarSaga 100 Prime solar panelJackerySolarSaga 100 PrimeRigidMountable panel with a bracket kit.100 W22.7 Vopen circuit, 5.53 A short-circuit13.2 lb8 W per lbAndersonDC8020 cable in the boxPick your station above$249Check price
EcoFlow 100W Rigid solar panelEcoFlow100W RigidRigid100 W20.3 Vopen circuit, 6.3 A short-circuit13.7 lb7 W per lbMC4Pick your station above$139Check price
EcoFlow 100W Flexible solar panelEcoFlow100W FlexibleFlexible100 W20.3 Vopen circuit, 6.3 A short-circuit5.1 lb20 W per lbMC4Pick your station above$299Check price
BLUETTI SP100L solar panelBLUETTISP100LPortable100 W24.62 Vopen circuit, 5.13 A short-circuit10.9 lb9 W per lbMC4Pick your station above$249Check price
BLUETTI PV100 FX Flexible solar panelBLUETTIPV100 FX FlexibleFlexibleSold as a set of two. A high-voltage 100 W panel: mind small stations with a 28 V limit.100 W41.4 Vopen circuit, 3.05 A short-circuit4.85 lb21 W per lbMC4Pick your station above$329pack of 2Check price
EcoFlow 110W Portable solar panelEcoFlow110W PortablePortable110 W21.8 Vopen circuit, 6.5 A short-circuit8.8 lb12 W per lbMC4XT60 cable in the boxPick your station above$259Check price
EcoFlow NextGen 160W solar panelEcoFlowNextGen 160WPortable160 W21.3 Vopen circuit, 9.1 A short-circuit12.3 lb13 W per lbMC4XT60 cable in the boxPick your station above$369Check price
EcoFlow 175W Rigid solar panelEcoFlow175W RigidRigid175 W25.5 Vopen circuit, 8.3 A short-circuit20.5 lb9 W per lbMC4Pick your station above$199Check price
Jackery SolarSaga 200W solar panelJackerySolarSaga 200WPortable200 W22 Vopen circuit, 12.5 A short-circuit14.33 lb14 W per lbDC8020Pick your station above$429Check price
BLUETTI 200W Portable (SP200L) solar panelBLUETTI200W Portable (SP200L)Portable200 W24.6 Vopen circuit, 10.8 A short-circuit17.15 lb12 W per lbMC4Pick your station above$329.99Check price
EcoFlow NextGen 220W Bifacial solar panelEcoFlowNextGen 220W BifacialPortable220 W21.5 Vopen circuit, 12.4 A short-circuit15.4 lb14 W per lbMC4XT60 cable in the boxPick your station above$449Check price
BLUETTI 350W solar panelBLUETTI350WPortableBLUETTI's page gives the voltage but not the current or the weight.350 W33 Vopen circuit, Current not listedNot listedMC4Pick your station above$649Check price
EcoFlow 400W Rigid solar panelEcoFlow400W RigidRigidSold as a pack of two with mounting feet. Figures are per panel.400 W37.1 Vopen circuit, 13.79 A short-circuit48.1 lb8 W per lbMC4Pick your station above$1,599pack of 2Check price
Anker SOLIX PS400 (400W) solar panelAnker SOLIXPS400 (400W)PortableClose to 60 V on its own: one panel per 60 V input.400 W57.6 Vopen circuit, 8.33 A at full power35.3 lb11 W per lbMC4Pick your station above$699.99Check price
Anker SOLIX 440W Rigid solar panelAnker SOLIX440W RigidRigidSold as a pack of two. Figures are per panel.440 W39.16 Vopen circuit, 13.88 A short-circuit46.3 lb10 W per lbNot listedPick your station above$1,289.99pack of 2Check price
Jackery SolarSaga 500 X solar panelJackerySolarSaga 500 XPortable500 W48.5 Vopen circuit, 13.02 A short-circuit22.05 lb23 W per lbAndersonDC8020 cable in the boxPick your station above$999Check price
BLUETTI 500W solar panelBLUETTI500WPortable500 W49.1 Vopen circuit, 13.31 A short-circuit28.4 lb18 W per lbMC4XT60 cable in the boxPick your station above$849Check price

How the fit is worked out

Three checks, in order of importance. The first one protects your power station.

Check 1

Voltage

A panel’s open-circuit voltage (Voc) must stay under the maximum of the solar input. Panels in series add their voltages, so the chart keeps the string 10% under the limit, because cold weather pushes panel voltage up. A single panel that already sits within that margin is flagged.

Check 2

Watts and amps

The input has a watt ceiling and often a current ceiling. Anything above is left on the table. The chart shows the watts that get through, then turns them into a charging time at 75% of the rated output, a fair figure for strong sun.

Check 3

Connector

Portable stations use XT60, DC8020 or DC7909 inputs. Many panels end in MC4. The chart tells you whether the cable in the box does the job or whether you need an adapter.

Charging time (h) = battery Wh ÷ (panel watts × 0.75)Not sure how much power you use? Start with the appliance wattage chart, then compare stations in the power station comparison chart. Running a dish off-grid? See the Starlink power calculator.

Portable, rigid or flexible

The three families in the chart are built for different jobs.

14 in the chart

Portable

Folding panels with a kickstand, made to travel with the station. The lightest for its power here is the Jackery SolarSaga 500 X, at 23 W per pound.

5 in the chart

Rigid

Framed glass panels for a roof, a shed or a ground mount. Heavier and cheaper per watt as a rule, and meant to stay in place for years.

2 in the chart

Flexible

Thin panels that follow the curve of a van or RV roof. Light and discreet, at the price of a shorter life than framed glass.

Questions about solar panels and power stations

Can I use another brand's solar panel with my power station?

Usually yes. A power station does not care about the logo on the panel. It cares about three things: the open-circuit voltage must stay under the limit of its solar input, the panel must reach the minimum voltage of that input, and the plug has to match or be adapted. Pick your station in the chart and each panel gets a verdict on those three points.

What happens if a panel's voltage is too high for the station?

It can damage the solar input, and that kind of damage is typically not covered by the warranty. This is the one hard limit in solar charging. Small stations often stop at 28 V, while some panels reach 57.6 V on their own, so the wattage alone tells you nothing about safety. The chart marks those pairs as Do not connect.

Can I connect more panel watts than my power station accepts?

Yes, as long as the voltage stays inside the window. The station simply takes what its input allows and leaves the rest. A little extra panel helps on hazy days and at low sun angles. A lot of extra panel is money that never reaches the battery, which is why the chart shows the watts you actually get.

Should I wire panels in series or in parallel?

Series adds the voltages and keeps the current of one panel. Parallel adds the currents and keeps the voltage of one panel. The chart counts panels in series: MC4 panels plug into one another with no extra parts, and cable losses stay low. It keeps the string 10% under the voltage limit of the input whenever a shorter string can do the job.

How many solar panels do I need to charge a 1,000 Wh power station?

Divide the capacity by the watts your panels deliver. With 200 W of panels and about 75% of the rated output in real sun, 1,000 Wh takes roughly 6 to 7 hours of strong sun. With 400 W it takes a little over 3 hours, provided the station's input accepts 400 W.

Do I need an MC4 adapter?

Only when the plugs differ. Most third-party and rigid panels end in MC4 connectors, while portable power stations use XT60, DC8020 or DC7909 inputs. Some panels ship with the right cable in the box. The chart says so for each panel once you pick a station.

Sources and method

  • Panel figures are the makers’ own: rated power, open-circuit voltage, current, weight and connector, read on their US product pages or in their user manuals.
  • A panel is listed only when its maker publishes the open-circuit voltage. Without it, no one can say whether a pairing is safe.
  • Solar input limits of the power stations come from the spec sheets behind our head-to-head comparisons. 68 of the 72 stations have a published voltage window. For the others the chart says so instead of guessing.
  • The chart counts panels in series on each input, never above the voltage limit, and 10% under it whenever a shorter string works. Panels with a barrel or Anderson plug need the maker’s series connector to be chained. Parallel wiring needs a branch connector and is left to the manuals.
  • Prices are read on each maker’s US store several times a day. Price per watt divides the price by the rated watts of the panel, or of the pack when panels are sold in sets.
  • Charging times assume 75% of the rated output, in strong sun, with the battery empty. Clouds, heat, shade and panel angle all lower the result.
  • When this chart and a user manual disagree, follow the manual.

Specifications read on November 16, 2026. Prices checked November 21, 2026.