Methodology

How we compare power stations

Every duel, chart and calculator on BackupPowerHub runs on the same short list of rules. This page shows them all: where the numbers come from, the formulas we use, and what we deliberately leave out.

The short version

Specs from the brand

Every figure comes from the brand’s US spec sheet or user manual. Each comparison shows the date we last checked it.

Prices from the brand’s US store

Prices are read from the official US stores several times a day. A price older than 36 hours is hidden, not shown stale.

Formulas in the open

Runtime, price per kWh and solar charging follow fixed formulas, all listed below, so you can redo any number yourself.

A verdict per buyer, not a score

We never give stars or a points total. A duel ends with “pick A if…, pick B if…”, because the right answer depends on your use.

What we don’t do: we don’t run lab tests on these units, and we never write “we tested” when we haven’t. Where measured results help, we cite independent reviewers by name, with a link and a date. More on this in our editorial guidelines.

Where the specs come from

  • Official US documents only. Capacity, output, surge, solar input, voltage window, weight, cycle life and warranty come from the brand’s US product page, spec sheet or manual. UK and EU versions often differ, so we flag them when a source uses one.
  • Missing means missing. When a brand hasn’t published a figure, we write “Not listed” or “X hasn’t published this”. We never fill the gap with a guess, and “Not listed” never turns into “No”.
  • Dated checks. Each duel carries the date its specs were last checked against the brand’s pages.
  • Independent reviews, named. When we mention real-world results, they come from independent reviewers we have read, cited with author, link and date. We don’t use Amazon reviews, brand blogs or review aggregators as evidence.

How prices work

  • Prices come from each brand’s official US store (Jackery, EcoFlow, BLUETTI, Anker SOLIX). They are rechecked several times a day.
  • When the store applies an automatic discount at checkout, we show the final price you will actually pay, with the regular price crossed out.
  • A price we haven’t been able to confirm in the last 36 hours disappears from price blocks and charts. In running text, you will see “see current price” instead of an old figure.
  • We only call something a “lowest price” after at least 7 days of daily price history.
  • Any sentence that compares prices (“A is $200 cheaper”) is recalculated from today’s prices. If the gap flips, the sentence changes with it.
  • Affiliate links never change a ranking. The comparison chart is sorted by price per kWh by default, whatever the brand.

The formulas

These are the exact calculations behind our duels, chart and calculators.

What we calculateFormulaWhy
Runtime on one applianceWh × 0.85 ÷ wattsAbout 15% of stored energy is lost in the inverter and electronics on AC power. We use 85% usable for every model, so comparisons stay fair.
Price per kWhprice ÷ Wh × 1,000The fairest way to compare stations of different sizes.
Weight efficiencyWh ÷ poundsHow much energy you carry per pound.
Cost per cycleprice ÷ (cycles × kWh)Shown only when both brands rate cycle life to the same remaining capacity (for example 80%).
Years of daily usecycles ÷ 365One full charge and discharge per day.
Solar energy per day (duel calculator)min(panel watts, solar input) × sun hours × 0.70A station can’t take more than its solar input limit, and real panels rarely deliver their rated watts over a full day.
Solar charging time (solar panel chart)battery Wh ÷ (watts received × 0.75)Time to charge from empty in strong sun.

How a duel is decided

Each duel is written by our editors for specific uses, and the numbers in it follow fixed rules:

  • Close is a tie. If two runtimes are within 5% of each other, we call it practically a tie rather than naming a winner.
  • Cycle life is compared like for like. One model only “wins” on cycles when both brands rate them at the same remaining capacity. Otherwise there is no winner on that line.
  • Features need a clear yes. An app or UPS mode counts as an advantage only when one brand confirms it and the other doesn’t offer it. If a brand is silent, the line reads “Not listed”.
  • The interactive “Our pick”. Inside each duel, the calculator picks the model that does something the other can’t for your setup: a load above the other’s AC output, more panels than the other accepts, expansion batteries, a 12V outlet, at least 10% more capacity, faster UPS switchover or more AC outlets. If each model wins on something, it tells you what you give up. If neither does, it points to the one that costs less today.

Can it run my appliance?

Our compatibility checker and wattage chart use two checks:

  • The station’s rated AC output must be at least the appliance’s running watts.
  • Its surge rating must cover the starting watts. When a brand doesn’t publish a surge figure, we use the rated output instead.

Boost modes (X-Boost, Power Lifting, SurgePad and similar) are not counted, because they lower the voltage and many appliances won’t run properly on them. 240V output is not checked by these tools.

Appliance wattages in the chart come from published references: Honda’s wattage estimation guide, DTE Energy, EWEB, Champion, ResMed and Starlink. The one line without a published source is labeled “Our estimate”.

Solar panel matching

The solar panel chart only lists panels whose open-circuit voltage (Voc) is published. For each station, it checks:

  • A string whose Voc goes above the station’s maximum input voltage is marked “Do not connect”.
  • We keep a 10% safety margin under that maximum whenever a shorter string can do the job.
  • Panels are wired in series only, with 6 panels at most.
  • Watts received are capped by the station’s solar input limit and its maximum input current.
  • A match that would need more than 6 panels, or that reaches less than 25% of the station’s solar input, is marked “Not a practical match”.

Calculator assumptions

Our runtime calculator uses the same 85% usable energy, plus a few clearly labeled options:

  • Fridges and freezers: counted at 30% of their rated watts, because the compressor cycles on and off.
  • Battery age: you can set 90%, 80% or 75% remaining capacity for an older unit.
  • Startup surge: a 1.4× margin is used to warn you when a load may trip the inverter.
  • Recommendations only include stations currently in stock at the brand’s US store.

The Starlink calculator uses Starlink’s own published power ranges for each dish, and picks stations on specs, never on price.

The limits, plainly

  • Runtimes are estimates. Temperature, battery age and how hard the inverter works all change real results.
  • Solar figures assume a clear day. Clouds, angle and heat can cut output a lot.
  • Specs can change after a firmware update or a model revision. We recheck them, but a brand may update its page before we do.

Try the tools

Spotted a wrong number?

Tell us. We check every correction against the brand’s official page and fix it.

[email protected]

Last reviewed November 17, 2026